Madhur ******

  • Head Quality
  • Updated 3 months ago
NDT or Inspection Qualification:


 American Society for Non-Destructive Testing (ASNT) NDT LEVEL III certificate holder in below methods (ASNT ID no. 208615).

 Radiography Testing (RT)

 Ultrasonic Testing (UT)

 Magnetic Particle Testing (MT)

 Penetrant Testing (PT)

 Visual and Optical Testing (VT) &

 Electromagnetic Testing (ET)

 American Welding Society (AWS) Certified Welding Inspector Certificate holder (Certificate no. 21117001).

 International Register of Certificated Auditors (IRCA) certified ISO 9001:2015 Quality Management Systems Lead Auditor certificate holder (Certificate no. 3520 2512 04)

 ISO 17025:2017 Internal Auditor -General requirements for the competence of testing and calibration laboratories.

 Trained and Certified from BARC (under central government of India) as Radiological Safety Officer.

 Trained and Certified from Radiation Protection Division (Under ministry of Kuwait) Radiological Safety Officer.

 Lean Six Sigma Green Belt Certificate holder from TUV-SUD (Certificate no. IN/12761/130831).

 Bachelors in Engineering (1st class) from Rajasthan University in 2009.

 Accredited Engineer from Kuwait Society of Engineering.

 Associated with various sectors as Head-Quality/Senior Inspection Engineer.


 Maintaining, implementation and documentation of various ISO/IEC/ OHSAS/ LEEA certification and accreditations.

 Developing and maintaining Integrated Management System (IMS) for company based on applicable ISO standards ISO 9001, ISO 14001 and ISO 45001.

 Implementing problem solving methodology and tools such as 8D, Root Cause Analysis tool, KAIZEN, Plan Do Check Act cycle (PDCA), DMADV and DMAIC tool to enhance the productivity of the process.

 Preparing pre-qualification (PQ) of technical bid for various Tenders and contracts.

 QA / QC of Welding, Piping, Pipeline, Structural, Fabrication, Erection & Testing in Refinery, Petro chemical & Power Plant.

 Close out of NCR’s and suggesting its Corrective and Preventive Actions for the various issues related to Quality assurance / control.

 Review of Material test certificates against specifications (BS EN 10204 -Type 3.1, 3.2).

 Familiar with Welding of materials like Carbon Steel, Different grades of Alloy Steel, Stainless Steel and processes like SMAW, GTAW, GMAW, and FCAW.

 Witnessing / Verifying NDTs, especially interpretation of radiographs and Destructive Tests for WPS / Welder / Procedure Qualification. Preparation of Test Packages for hydro and pneumatic testing.

 Complete Review of Hydro-test package includes all inspection reports, weld maps & As-built and witnessing Hydro testing.

 Inspection of Fabrication and Erection of Piping, Structural and Identification of Materials.

 Able to prepare Documents like Method Statements / Procedures, ITPs, PQR, WPS for different kind of materials, various sorts of Inspection Reports.

 Inspection of CS/SS piping fit-up and weld visual.

 Review of post heating and PWHT charts, Calibration Certificates and other Test Certificates.

 Witnessing Procedure Qualification Record and Welder Qualification test.

 Review of subcontractor’s procedures and quality documents.

 Verification, establishment and implementation of NDT procedures as per the client’s requirements.

 NDT Inspections – Radiography Test film interpretation, Liquid Penetration Test, Magnetic Particle Examination of welds and equipment (vessels, columns etc.), review of Post Weld Heat Treatment and Hardness testing. Witnessing positive material identification, ferrite testing and spectro– analysis of materials.

 ASNT NDT Level III consultancy services for various sectors and manufacturing industries.

 Preparing NDT procedures according to the required codes, specifications and standards.

 Training, qualifying and certifying NDT personnel as per the Document SNT-TC-1A of American Society for Nondestructive Testing.

 Conversant in Russian standard Gosudarstvennye Standarty State Standard (GOST). This includes various material dimensional and fabrication standards.

 SHELL DEPs, KNPC DEPs, ASME B 31.3, ASME B 31.1, ASME sec VII Div. 1 & Div.2, ASME sec V, Sec IX, AWS D 1.1, API codes and standards.

 Managing activities right from the conceptualization stage to the execution; involving finalization of technical specifications, progress monitoring, erection, testing & commissioning, site management, manpower planning.

 Planning resource and work scheduling to achieve effective manpower deployment of qualified workforce.