Sample Inspection Procedure for Ultrasonic Thickness
Measurement UTT as per ASME V

1.1 This procedure establishes the requirements for Manual Ultrasonic Thickness Measurement of materials and will be applied when Ultrasonic Thickness Measurement is required in accordance with ASME Section V, Article 5 by the referencing Code. This procedure will be used in conjunction with applicable client specifications.

1.2 This procedure will be used whenever manual ultrasonic thickness measurements per the requirements of ASME are specified.

1.3 Ultrasonic examination shall be performed in accordance with a written procedure which shall, as a minimum, contain the requirements found in Table 1.0.