Standard Membergeorge
Standard MemberForum Replies Created
We have been successful using the Fuji Dynamix 4 CR System. We have shot the Agfa system side by side with the Fuji System. We were not able to pull the 2-2T hole using the Agfa system. Agfa may be able to tweak their menus to help you a bit. If it’s not to late take a look at the Fuji system. We now own 4 of the Fuji systems and are very pleased with their performance.
We build field-portable systems to detect corrosion under insulation using x and gamma real-time radioscopy. These systems have been developed and used extensively in Alaska for many years. Our latest versions are carried by wireless intelligent crawlers which can inspect more than 1000 feet of pipeline per day.
Our company has a system to inspect concrete for voids, cracks and thickness.
Please call me at 416-213-8000 in TorontoThe specific examination shall consist of a minimum of 20 questions to meet the requirements of SNT-TC-1A. If you or your organization feel that 20 questions is not enough to properly cover the broad range of specifications, equipment, techniques and so on, you may put as many questions as you like on the exam.
Yes, it is possible, if you will measure from the other side of the wall.
You can use the same equipment, only the software must be able to measure and show the changes during the coatingI think one of the well known Cathodic Protection companies is Global Cathodic Protection from Houston,
their website is globalcathodic.comLismar Engineering in the Netherlands recently developed an automated roll
inspection system that uses multiple surface waves. Their objective is to find cracks
with arbitrary orientation, and with a depth of at least 0.1mm.I would like to measure the acoustic speed in liquid titanium
: during laser gas alloying. The enclosed figure shows the intended
: arrangement. Can you give useful hints about suitable transducers
: and frequencies?
I suggest that you discuss your problem with C.K. Jen of the Industrial
Materials Institute of the National Research Council of Canada. He is
already doing ultrasonic measurements in other molten metals.
