Codes and Standards
Welcome to [NDT Inspection Portal]’s NDT and inspection codes and standards group, a place... View more
ASME CC2235-11 acceptance criteria
ASME CC2235-11 acceptance criteria
Hi,
When evaluate subsurface indication against Table 1, 2 and 3 of CC2235-11, do we need to multiple the height or ‘a’ with 2 since the subsurface represent as 2a. Please advise. TIA
- 1 Reply
In the ASME is written :
(-b) The depth of the flaw shall be drawn normal to the inside pressure retaining surface and shall be denoted as “a” for a surface flaw or “2a” for a subsurface flaw.For me denoted means it is written as “a” for surface flaws and written as 2a for subsurface flaws.
So it is not allowed to take 2 time a for subsurface flaws. it is just written this way
Log in to reply.