Reply To: ISO 17636 1 (2013) – Single wall technique / IQI film side / IQI selection

  • Codes and Standards

    chris

    Member
    03/04/2021 at 1:26 pm

    Hi,

    According to ISO 17636, For exposures in accordance with 7.1.6 and 7.1.7, the IQI type used can be placed either on the source or on
    the film side. If the IQIs cannot be placed in accordance with the above conditions, the IQIs are placed on the
    film side and the image quality shall be determined at least once from comparison exposure with one IQI
    placed at the source side and one at the film side under the same conditions.

Report

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .