Reply To: Corrosion Inspection

  • Corrosion Mapping (CM)

    jaden

    Member
    28/11/2021 at 12:36 pm

    you may try our multichannel ultrasonic gauge UT200s. It can handle pipe thickness measurement submerged under water when the probe is a few mm away from the pipe:
    https://www.broadsens.com/dataacquisition/multi-channel-ultrasonic-thickness-gauge/

    Most likely, you will look at the echoes from the pipe and decide the thickness based on the echo.
    There could be multiple reflections from the corroded pipe. UT200s software recently added the analysis window feature, which allows you to define the start point and end point of the thickness analysis window. This can help identify the thickness of the corroded pipe.