Phased Array Problem

  • Phased Array Ultrasonics (PAUT)

    Phased Array Problem

    Posted by william on 27/11/2021 at 4:01 pm

    Hello,
    Lately, while performing PAUT, i get no signals from my probe in a certain range of angles(white area between the red lines in the attached picture).This happens more and more often. While my phased array device and Y-splitter work fine with other probes, i get this problem with a certain probe. Any ideas what the problem could be and how to solve it?.
    Thanks in advance.

    jaden replied 2 years, 11 months ago 2 Members · 1 Reply
  • 1 Reply
  • Phased Array Ultrasonics (PAUT)

    jaden

    Member
    28/11/2021 at 1:10 pm

    Yes all of the probe elements are working properly. The problem is from 57 to 62 degrees where there is not even initial pulse.

Log in to reply.

Start of Discussion
0 of 0 replies June 2018
Now

Report

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .