Phased Array Problem

  • Phased Array Problem

    Posted by william on 27/11/2021 at 4:01 pm

    Hello,
    Lately, while performing PAUT, i get no signals from my probe in a certain range of angles(white area between the red lines in the attached picture).This happens more and more often. While my phased array device and Y-splitter work fine with other probes, i get this problem with a certain probe. Any ideas what the problem could be and how to solve it?.
    Thanks in advance.

    jaden replied 2 years, 4 months ago 2 Members · 1 Reply
  • 1 Reply
  • Phased Array Ultrasonics (PAUT)

    jaden

    Member
    28/11/2021 at 1:10 pm

    Yes all of the probe elements are working properly. The problem is from 57 to 62 degrees where there is not even initial pulse.

Log in to reply.