MD *****

  • GRE/GRP/FRP QC INSPECTOR
  • Any where
  • Updated 6 months ago
NDT or Inspection Qualification:

• Verify the cutting, cleaning, machining and application of adhesives, joining and curing as per bonding procedure.
• Material identification of RTR / GRE /GRP Pipes, Fittings and Spools.
• Verify the cutting, sanding, cleaning, mixing, fixing, laminating and curing as per laminate joint procedure.
• Ensure that the heating blanket is properly stored.
• Inspection of the flanged joints based on the pressure.
• Check the pipe supports are at minimum required distance.
• Confirm that the pipe ends, and mechanical surfaces are properly protected.
• Procedures, client specifications and approved Drawings.
• Instruct and guide the lamination crews Marking, Cutting and Fabricating Spools as per shop drawings & Isometric drawing.
• Preparation of Final QC Dossier in format as required by Client.

A growth driven self-motivated professional offering over 8.5 years of experience in and Execution of projects related to Fabrication & Erection project of Steel Power Plant / Thermal Power Plant and GRP (GRUP,GRE & GRVE), HDPE Piping and Structural jobs as Qa/Qc Engineer coupled with strong leadership and communication skills to contribute in achieving organization’s long-term goal

Experience

Saudi Arabian amiantit company

GRE/GRP/FRP QC INSPECTOR - 16/September/2016 to 05/December/2020

• Verify the cutting, cleaning, machining and application of adhesives, joining and curing as per bonding procedure.
• Material identification of RTR / GRE /GRP Pipes, Fittings and Spools.
• Verify the cutting, sanding, cleaning, mixing, fixing, laminating and curing as per laminate joint procedure.
• Ensure that the heating blanket is properly stored.
• Inspection of the flanged joints based on the pressure.
• Check the pipe supports are at minimum required distance.
• Confirm that the pipe ends, and mechanical surfaces are properly protected.
• Procedures, client specifications and approved Drawings.
• Instruct and guide the lamination crews Marking, Cutting and Fabricating Spools as per shop drawings & Isometric drawing.
• Preparation of Final QC Dossier in format as required by Client.

Education

B.E in mechanical engineering

Vinayaka mission University
2009/2012

Skills

  • NDT level -2