OMER **** ***** ********

  • NDT Engineer/NDT Inspector
  • Updated 3 months ago
NDT or Inspection Qualification:

NDT LEVEL 3 in (RT, MT & PT) ISO 9712(SAQCC), Southern African Institute of Welding(SAIW) Johannesburg
NDT LEVEL II in RT, UT,MT and PT, ISO 9712(SAQCC) Southern African institute of welding(SAIW) Johannesburg
Certificate of MSC in Radiation Protection and Environment, Sudan Academy of Sciences

RESUME
Name:
OMER TAHA OSMAN ELSIDDIG
Position:
PMC-NDT Engineer, NDT LEVELIII & Radiation Safety Officer(RSO)
Nationality:
Sudanese
Date of Birth:
Jan. 01, 1979
Gender:
Male
Email address
[email protected]
Education Background:
Period
Education description
2010 – 2012
MSc in Radiation Protection & Environment
2000-2005
Full time BSC in applied Physics, Faculty of Sciences
Training :
Period
Training description
Jan 2018- march2018
NDT LEVEL 3 in (RT,MT & PT) ISO 9712(SAQCC), Southern African institute of welding(SAIW) Johannesburg
May 2016
Preparation Course Certified Welding Inspector(CWI)
March2015
NDT LEVELII in RT,UT,MT and PT, ISO 9712(SAQCC) Southern African institute of welding(SAIW) Johannesburg
Jan2015- march2015
LEVELI in RT,UT,MT and PT, ISO 9712(SAQCC) Southern African institute of welding(SAIW) Johannesburg
Nov 2013
Specialized workshop entitled “Nondestructive Testing in Nuclear Applications” Arab Atomic Energy Agency in
Sudan Atomic Energy Commission (SAEC)
August 2013
Ultrasonic Testing (UT Level II SNT-TC-1A), Sudan Atomic Energy Commission, Khartoum, Sudan
May2013
Corrosion Principle & Protection, Sudan Atomic Energy Commission, Khartoum,
Sudan
May2012
Radiographic Testing (RT) level II ISO9712 ,Sudan Atomic Energy Commission, Khartoum, Sudan
June2012
ASNT NDT LEVEL II & LEVEL I Liquid Penetrant Testing (LPT), ASNT(PTC)
Petroleum Training Centre Khartoum, Sudan
2012
Introduction to Welding Engineering, International Centre For Training & capacity
Building
2009
Radiation Protection in Industrial Radiography, Sudan Atomic Energy Commission,
Khartoum, Sudan
Oct2005
Radiographic Testing (RT) Level I ISO 9712, Sudan Atomic Energy Commission, Khartoum, Sudan
Certificates:
1. Certificate of MSC in Radiation Protection and Environment, Sudan Academy of Sciences
2. NDT level 3 in RT/MT/PT ISO 9712(SAQCC), Southern African Institute of Welding(SAIW)
Johannesburg
3. NDT level2 in, UT/ RT/MT/PT, ISO 9712(SAQCC), South Africa institute of welding(SAIW)
Johannesburg
4. NDT level2 in PT&UT SNT-TC-1A
Work Experience:
Period
Work description
Aug.2019-
Now
 Missan Oil Field BUT Projects (Iraq)
NDT Engineer
I joined this project as a PMC NDT Engineer in August 2019 for the following projects:
1. WTPII & WTPIII (Water Treatment Plant)
2. WTP upgrade
3. 2nd gas compressor
4. New Water washing tank
5. Drainage upgrade project
6. Water treatment skid 3000m3
Jun.2011-
July 2012
 Sudan Atomic Energy Commission, Beta Tech NDT Services( Hadida – Balila
Project) client petro energy (Sudan)
NDT supervisor
This project contains the construction of oilfields, pipelines. In this project I mainly responsible for the following works:
1. Supervision of NDT activities.
2. Review RT films.
4. Writing weekly and monthly report.
5. Prepare the NDT report.
6. Performing all NDT methods in different sectors including the oil & gas industry & petrochemical industry
7. Quality manual and procedures developing and updating
8. Responsible for developing, implementing, and maintaining the department Quality Manual and Procedures.
Jun. 2012-
Nov. 2015
 Pipeline Repair for Petrolines Crude Oil PETCO (Sudan)
Welding and NDT Inspector
This project was intended to rehabilitate old pipelines and repair them from corrosion. In this project I am mainly responsible for the following works:
1. Witnessing of welder and welding operator qualification test.
2. Witnessing of welding procedure qualification test.
3. Monitoring welding activities before, during, and after fabrication are performed as required by WPS.
4. Monitoring Preheating, Inter pass temperature, Post weld heat treatment, and Control & Storage of Welding Consumables.
5. Reviewed Method statement, Procedure that was Submitted from the Contractor.
6. Check Material Identification as per WPS and Welder Qualification test Limited.
7. Reviewed NDE report for joints that have been visually accepted as required by the NDE plan and monitoring the status.
2015- 2017
 Beta Tech NDT Services projects (Sudan)
Radiation Safety Officer(RSO)
For Beta Tech NDT Services Property of Sudan Atomic Energy Commission NDT service projects. In this projects I mainly responsible for the following works:
1. Handling the renewal & issuance of radiation licenses & sources importation/exportation permits
2. Implementing updated protection procedures
3. Transporting radioactive sources from to jobsite /storage bunker as per SNRRA
4. Supervision of radiation safety matters
5. Liaison with local authorities
6. Controls review and film badge audit
7. Survey meter, calibration status
8. Client requirement surveillance and appraisal
9. Review of operating procedures
10. Provide radiation safety refresher to radiographers
11. Radiation projector maintenance record
12. Radiation safety training for radiographers.
2017-2018
 Pipe line Repair for Petrodar Operating Company(PDOC), Centroid Technical Company (Sudan)
NDT/Composite Inspector
1. follow the composite application process
2. Review coating procedure
3.
Review NDT procedures
4.
Witness the application of coating
Language:
Mother language:
Arabic
Second language/lev el:
English

Experience

CNOOC Safety & technology

NDT Engineer - 03/08/2019

Sudan Atomic Energy Commission

NDT Inspector/Radiation Safety Officer - 01/07/2009 to 01/08/2019