STANLEY ********
ASNT Level 2 (DRT, CRT, RT, MT, PT, UT), ASNT Level 3 Basic Pass, UT & RT In-view.
1. Personal Details
Surname : Macaulay
First Names : Oletu Stanley
D/License # : N/A
Date Of Birth : 31 October, 1989
Sex : Male
Marital Status : Single
Nationality : Nigerian
Home Language : English
Postal Address : No. 1 Harmony Street Off Odani Elelewon, Obio/Akpor LGA, R/S. Nigeria
Contact Details : +234(0)8061225026
Email Address : [email protected]
Health : Excellent
Criminal Offence : None
Hobbies : Swimming, Reading And Travelling
2. Academic Details
Tertiary Education
B.Eng : Mechanical Engineering
School : Niger Delta University, Wilberforce Island Bayelsa State.
Year : 2007 – 2012
Secondary Education
SSCE : West African Examination Council
School : Brisco Secondary and Commercial College, Warri, Delta State.
Year : 2001 – 2007
3. Professional Certification Details
Institute 1 : Petroleum Training Institute
COURSE TAKEN : Qa/Qc In Mechanical Engineering Practice And Design
YEAR OBTAINED : 2014
Institute 2 : Climax Inspection Services Limited
Course Taken : Radiographic Testing (RT)
: Magnetic Testing (MT)
: Penetrant Testing (PT)
: Ultrasonic Testing (UT)
Year Obtained : 2014
Institute 3 : HT-NDT Training, Consultancy and Services
Course Taken : Computed Radiography Testing (CRT)
: Digital Radiography Testing (DRT)
: Radiographic Testing (RT)
: Magnetic Testing (MT)
: Penetrant Testing (PT)
: Ultrasonic Testing (UT)
Year Obtained : 2017
Institute 4 : Tolmann Deepwater Survival Training Centre
Course Taken : Basic Offshore Safety Induction Emergency Training (Bosiet)
Year Obtained : 2018
Institute 5 : West Atlantic Energy Nigeria Limited
Offshore Safety Pass (OSP)
Year Obtained : 2019
Institute 6 : American Society For Non-Desructive Testing (ASNT)
Course Taken : ASNT LEVEL III (BASIC) I.D NO:327143
Year Obtained : May 2021
Course Taken : ASNT LEVEL III (UT & RT)
Year Obtained : On-Going
4. Employment History
1. Company : Climax Inspection Services Limited
Place Of Employment : Nigeria
Position : NDT / QA/QC Inspector
Period : 2014 till Date
Responsibilities : See below
- Interprets and Evaluate results in accordance with applicable codes, standard and specification using Digital Radiography Systems (Computed radiography {CR} and Digital Radiography {DR}).
- Carrying out radiography on new fabrication butt welds in In-service Piping and equipment using Conventional Radiography.
- Carryout Magnetic Testing on Welded Joints comprises of pipes and plates.
- Carrying out Penetrant testing (both Fluorescence and Non-Fluorescence) on Super alloys, Carbon and stainless steel.
- Carrying out Ultrasonic Testing {Thickness check, Corrosion Assessment and Flaw detection} on Super Alloys, carbon and stainless steel.
- Preparing, developing and maintaining up to date quality procedures, documents and method statement for client usage.
- Preparation of procedure qualification for WPS, qualify welders and prepare welders qualifications and welders ID.
- Review of associate quality control document to ensure compliance with codes, standards and client specifications.
- Supervise field inspection of site construction, NDT activities and preparation of daily report.
2. Company : Climax Inspection Services Limited {Pie-Enikom}
Place Of Employment : Nigerian Petroleum Development Company Ltd (Npdc)., Onshore, Nigeria.
Project Title : Replacement Of 10ʺ×12km Utorogu Ups Using Hdd In Oml 34.
Position : Lead NDT Inspector {RT, & MT}
Period : November 2021 Till Date.
Responsibilities : See below
- Management of site NDT activities.
- Carrying out Radiographic Testing on newly welded joints using Conventional Radiography.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Generate NDT Typed reports.
3. Company : Climax Inspection Services Limited
Place Of Employment : Niger Delta Petroleum Resources, Ogbelle Rivers State, Onshore, Nigeria.
Project Title : Horizontal Tank Inspection At NDPR Ogbelle R/S.
Position : Lead NDT Inspector {UT, VT, MT & PT}
Period : 6th & 7th NOVEMBER, 2021.
Responsibilities : See below
- Carrying out Tank Inspection as per API 653, API RP 575 & API 12R.
- Carrying out Ultrasonic Inspection on the tank.
- Carrying out Visual Inspection on exterior of the tank.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Generate NDT Typed reports.
4. Company : Climax Inspection Services Limited {Hydrodive}
Place Of Employment : Oriental Energy Resources Limited, Offshore, Nigeria.
Project Title : FSO VIRINI PREM HULL REPAIR /LIFE EXTENSION PROJECT
Position : Lead NDT Inspector {UT, & MT}
Period : AUGUST TO SEPTEMBER 2021
Responsibilities : See below
- Carrying out Ultrasonic Flaw detection on carbon steel plate after replacement of defect point.
- Carryout Magnetic Testing on Welded Joints and stiffeners
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Generate NDT Typed reports.
5. Company : Climax Inspection Services Limited {Wirelink Integrated Services Limited}
Place Of Employment : Total Energy, Offshore, NIGERIA.
Project Title : 6ʺ FSO Unity Fuel Line Replacement Project
Position : Lead NDT Inspector {UT, MT & RT}
Period : April To May 2021
Responsibilities : See below
- Carrying out Ultrasonic Testing {Thickness check and Flaw detection} on Super Alloys, carbon and stainless steel.
- Carrying out Radiographic Testing welded joints
- Carryout Magnetic Testing on Welded Joints comprises of pipes and plates for supports
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Generate NDT Typed reports.
6. Company : Climax Inspection Services Limited {Lubrik Engineering Services}
Place Of Employment : NIGERIA
Position : Lead NDT Inspector {UT, MT & PT}
Period : July To August 2020
Responsibilities : See below
- Carrying out Ultrasonic Testing {Thickness check and Flaw detection} on Super Alloys, carbon and stainless steel.
- Carryout Magnetic Testing on Welded Joints comprises of pipes and plates.
- Carrying out Penetrant testing (both Fluorescence and Non-Fluorescence) on Super alloys, Carbon and stainless steel.
7. Company : Climax Inspection Services Limited {Orange & Orbital/ Beneprojecti Nigeria Limited-MPN}
Place Of Employment : Onshore
Project Title : Asasa-VA Pigging Facility Upgrade Phase 6
Position : NDT Inspector {UT, MT, RT, PT, & HT}
Period : 10th December 2019-January 2020
Responsibilities : See below
- Carryout Ultrasonic Testing in In-Service Piping.
- Carryout Radiographic testing on fabricated pipes.
- Carryout Magnetic particle Inspection on fabricated pipes and structures.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Carrying out Ultrasonic Testing {Thickness check and Corrosion Assessment}
- Generate NDT Typed reports
8. Company : Climax Inspection Services Limited {Weco Engineering And Construction Company}
Place Of Employment: Odudu Platform –Total Field
Position : Lead NDT Inspector {MT, UT}
Period : 10th August – December, 2019
Responsibilities : See below
- Carryout Ultrasonic Testing in In-Service Piping.
- Perform Flowrate Measurement to monitor Flows in Pipes.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Carrying out Ultrasonic Testing {Thickness check and Corrosion Assessment}
- Generate NDT Typed reports.
9. Company : Climax Inspection Services Limited {Prime Sources Limited – MPN}
Place of employment: MPN Field
Position : Lead NDT Inspector {RT, MT, PT, UT}
Period : February, 2019 – June, 2019.
Responsibilities : See below
- Carrying out radiography on new fabrication butt welds in In-service Piping and equipment using Conventional Radiography.
- Carryout Dye Penetrant Inspection and Magnetic Particle Inspection on welding and Nozzles both internally and externally.
- Carryout Hardness Testing and Positive Material Identification testing.
- Carryout Ultrasonic Testing in In-Service Piping.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Generate NDT Typed reports.
10. Company : Climax Inspection Services Limited {For Wire-link Services Limited}
Place of employment : FSO Unity – Total field
Position : NDT Inspector/RSO {RT, MT, PT, HT, UT}
Period : January, 2019 – February10, 2019
Responsibilities : See below
- Carryout testing of welds and corrosion assessment using Digital Radiography Systems (Computed radiography {CR}).
- Carrying out radiography on new fabrication butt welds in In-service Piping and equipment using Conventional Radiography.
- Carryout Dye Penetrant Inspection and Magnetic Particle Inspection on welding and Nozzles both internally and externally.
- Carryout Hardness Testing and Positive Material Identification testing.
- Carryout Ultrasonic Testing in In-Service Piping.
- Perform Flowrate Measurement to monitor Flows in Pipes.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Carrying out Penetrant testing (both Fluorescence and Non-Fluorescence) on Super alloys.
- Carrying out Ultrasonic Testing {Thickness check and Corrosion Assessment} on Super Alloys.
- Generate NDT Typed reports.
11. Company : Climax Inspection Services Limited {For Orbital & Oranges Nigeria Limited – MPN}
Place of employment: Usan FPSO – MPN Field
Position : NDT Inspector {RT, MT, PT, UT}
Period : October, 2018 – November, 2018.
Responsibilities : See below
- Carryout testing of welds and corrosion assessment using Digital Radiography Systems (Computed radiography {CR} and Digital Radiography {DR}).
- Carrying out radiography on new fabrication butt welds in In-service Piping and equipment using Conventional Radiography.
- Carryout Dye Penetrant Inspection and Magnetic Particle Inspection on welding and Nozzles both internally and externally.
- Carryout Hardness Testing and Positive Material Identification testing.
- Carryout Ultrasonic Testing in In-Service Piping.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Generate NDT Typed reports.
12. Company : Climax Inspection Services Limited {For General Electric}
Place of employment: Afam Power Plant – Oyigbo, Rivers State, Nigeria
Position : QC/NDT Inspector {RT, MT, PT, HT, UT}
Period : November, 2018 – December, 2018
Responsibilities : See below
- Carrying out radiography on new fabrication butt welds in In-service Piping and equipment using Conventional Radiography.
- Carryout Dye Penetrant Inspection and Magnetic Particle Inspection on welding and Nozzles both internally and externally.
- Carryout Hardness Testing and Positive Material Identification testing.
- Carryout Ultrasonic Testing in In-Service Piping.
- Perform Flowrate Measurement to monitor Flows in Pipes.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Carrying out Penetrant testing (both Fluorescence and Non-Fluorescence) on Super alloys.
- Carrying out Ultrasonic Testing {Thickness check and Corrosion Assessment} on Super Alloys.
- Generate NDT Typed reports.
- Documentation of report and project documents.
13. Company : Climax Inspection Services Limited {For Entrepose Delattre Benzones Nigeria – Seplat}
Place of employment: OBEN, EDO STATE NIGERIA
Position : NDT Inspector
Period : December, 2017 – May, 2018
Responsibilities : See below
- Carryout testing of welds and corrosion assessment using Digital Radiography Systems (Computed radiography {CR} and Digital Radiography {DR}).
- Carrying out radiography on new fabrication butt welds in In-service Piping and equipment using Conventional Radiography.
- Carryout Dye Penetrant Inspection and Magnetic Particle Inspection on welding and Nozzles both internally and externally.
- Carryout Hardness Testing and Positive Material Identification testing.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Generate NDT Typed reports.
14. Company : Climax Inspection Services Limited {Weco Engineering and Construction Company}
Place of employment : FSO Unity–Total Energy
Position : NDT Inspector {RT, MT, PT, HT, UT}
Period : December, 2017
Responsibilities : See below
- Carrying out radiography on new fabrication butt welds in In-service Piping and equipment using Conventional Radiography.
- Carryout Dye Penetrant Inspection and Magnetic Particle Inspection on welding and Nozzles both internally and externally.
- Carryout Hardness Testing and Positive Material Identification testing.
- Carryout Ultrasonic Testing in In-Service Piping.
- Perform Flowrate Measurement to monitor Flows in Pipes.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Carrying out Penetrant testing (both Fluorescence and Non-Fluorescence) on Super alloys.
- Carrying out Ultrasonic Testing {Thickness check and Corrosion Assessment} on Super Alloys.
- Generate NDT Typed reports.
15. COMPANY : Climax Inspection Services Limited {Weco Engineering and Construction Company}
Place of employment: Odudu Platform –Total Energy
Position : NDT Inspector {MT, UT}
Period : 10th August – December, 2017
Responsibilities : See below
- Carryout Ultrasonic Testing in In-Service Piping.
- Perform Flowrate Measurement to monitor Flows in Pipes.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Carrying out Ultrasonic Testing {Thickness check and Corrosion Assessment}
- Generate NDT Typed reports.
16. Company : Climax Inspection Services Limited
Place of employment: Ekpe Platform – MPN Field
Position : NDT Inspector {RT, MT, PT, HT, UT}
Period : February, 2016 – August, 2016.
Responsibilities : See below
- Carryout corrosion assessment using Ultrasonic Testing {UT}.
- Carrying out radiography on new fabrication butt welds in In-service Piping and equipment using Conventional Radiography.
- Carryout Dye Penetrant Inspection and Magnetic Particle Inspection on welding and Nozzles both internally and externally.
- Carryout Ultrasonic Testing in In-Service Piping.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Generate NDT Typed reports.
17. Company : Climax Inspection Services Limited {Baywood Continental Limited}
Place of employment: Owokiri –SPDC
Position : NDT Inspector {MT, UT, FR}
Period : 10th August – December, 2015
Responsibilities : See below
- Carryout Ultrasonic Testing in In-Service Piping.
- Perform Flowrate Measurement to monitor Flows in Pipes.
- Interpret and evaluate results in accordance with applicable codes, standards and specification.
- Carrying out Ultrasonic Testing {Thickness check and Corrosion Assessment}
- Generate NDT Typed reports.
18. Company : Climax Inspection Services Limited {Prime Sources Limited}
Place of Employment: Warri–Chevron Nigeria Limited
Position : QA/QC engineer
Period : 10th June 2014 – August 2014
Responsibilities : See below
- Carryout inspection of daily weld production.
- Monitor NDT process.
- Documentation of inspection report.
- Interpretation of ISO/Engineering drawing.
With others too numerous to mention.
5. Reference
Available on Request.
Experience
-
CLIMAX INSPECTION SERVICES LIMITED
INSPECTION ENGINEER - 2014 TO DATE -
Interprets and Evaluate results in accordance with applicable codes, standard and specification using Digital Radiography Systems (Computed radiography {CR} and Digital Radiography {DR}).
Carrying out radiography on new fabrication butt welds in In-service Piping and equipment using Conventional Radiography.
Carryout Magnetic Testing on Welded Joints comprises of pipes and plates.
Carrying out Penetrant testing (both Fluorescence and Non-Fluorescence) on Super alloys, Carbon and stainless steel.
Carrying out Ultrasonic Testing {Thickness check, Corrosion Assessment and Flaw detection} on Super Alloys, carbon and stainless steel.
Preparing, developing and maintaining up to date quality procedures, documents and method statement for client usage.
Preparation of procedure qualification for WPS, qualify welders and prepare welders qualifications and welders ID.
Review of associate quality control document to ensure compliance with codes, standards and client specifications.
Supervise field inspection of site construction, NDT activities and preparation of daily report.
Education
-
BACHELOR OF ENGINEERING (MECHANICAL)
NIGER DELTA UNIVERSITY2007 - 2012
Skills
- Autocad
- maintenance
- Microsoft excel
- Microsoft power point
- Microsoft project
- Microsoft word
- Team Player
- troubleshooting etc.