Amentum is hiring a Non-Destructive Inspection Technician II in Savannah, Georgia, to inspect components of aerospace weapon systems, and their support equipment, for structural soundness and to carry out fluid analysis. Candidates need training and qualification under NAS 410 or ASNT-CP-189 and a completed Level II course, and experience on the UH-60 or AH-64 airframe is preferred. US citizenship is required for credentials at the work location, along with a Public Trust clearance.
Methods: PT, ET, MT, RT, UT · Level: NAS 410 or ASNT-CP-189 Level II · Sector: Army aviation maintenance
What the job involves
- Choose the test method and get parts and fluids ready for inspection
- Find cracks, voids, delaminations, heat damage and processing defects with eddy current, ultrasonic, penetrant, magnetic particle and radiographic equipment
- Interpret the results and pass defect information to the repair center
- Read wear-metal content reports for engine lubricating oil and similar fluids, then advise on what to correct
- Set up radiation areas for radiography and keep track of personnel exposure
- Maintain and service NDI and shop equipment, with lock-out and tag-out applied first, and handle hazardous waste
What you need
- Trained and qualified to the assigned level under NAS 410 or ASNT-CP-189
- Initial NDI Level II training course completed, with a current basic qualification
- Experience maintaining, modifying and repairing tactical aircraft systems of the type serviced
- Preferred: three or more years as an aviation inspector and at least a year on the UH-60 or AH-64 airframe
- US citizenship, needed for facility credentials at the work location, and the ability to hold a Public Trust NAC-I T1 clearance
- Familiar with ULLS-AE, the maintenance management system used for Army aircraft forms and records
Pay and conditions
- The posting prints a compensation figure of 42.52 USD without stating the pay period
- Shop or outdoor work; the shop can be noisy, drafty and dirty
- Lifting of 50 pounds or more, climbing ladders and work stands, and a respirator physical with fit test
- Benefits listed include 401(k) matching, paid time off and health, vision and dental insurance
How to apply
Apply directly with Amentum: the Apply for this job button opens this vacancy on the Amentum careers site. NDT Inspect found it on the employer’s careers page and checked that it was open on 21 November 2026. It is listed here until 21 February 2027.
















