Bureau Veritas Iraq is hiring a welding inspector for a site-based position in Basra. The role is welding surveillance on pipeline construction: watching the welding parameters, checking fit-up, preheat and PWHT, and reporting every day. The posting asks for ten or more years of surveillance experience, CSWIP 3.1 as a minimum, an engineering degree and NDT Level II in MT, PT, RT and UT.
Methods: RT, PT, UT, MT · Level: CSWIP 3.1 · Sector: Pipeline construction inspection
What the job involves
- Watch pipeline welding as it happens and log the welding parameters
- Confirm that welding follows the approved WPS and the project ITP, and that welders stay inside their qualified range
- Check fit-up with gauges: root gap, bevel angle, alignment, hi-lo and internal misalignment
- Monitor preheat and interpass temperatures and witness post-weld heat treatment where it applies
- Review and witness PQR and welder qualification tests, and release welds to the NDT team in the project sequence
- Raise NCRs for deviations, track performance against the welding KPIs and write daily surveillance reports
What you need
- At least 10 years of welding surveillance work, with 5 or more on inspection of cross-country pipeline welding
- CSWIP 3.1 Welding Inspector as a minimum; the posting also names IIW IWE, BGAS-CSWIP, CWI or an equivalent
- Engineering degree
- NDT Level II in MT, PT, RT and UT
- Working knowledge of API 5L, API 1104, ASME B31.3 and ASME Section IX
- Experience with fit-up gauges, PQR and welder qualification, preheat and PWHT; mechanised welding experience is an advantage
Pay and conditions
- Site-based position in Basra
- The posting does not state pay, rotation or benefits
How to apply
Apply directly with Bureau Veritas: the Apply for this job button opens this vacancy on the Bureau Veritas careers site. NDT Inspect found it on the employer’s careers page and checked that it was open on 21 November 2026. It is listed here until 21 February 2027.
















