Element's Hartford operation, listed at South Windsor, Connecticut, is looking for a Level II or Level III in magnetic particle inspection (MPI) who will act as a working technical resource in its NDT department. Most of the time goes on hands-on wet continuous and residual MPI of aerospace and other high-specification parts, together with writing and maintaining technique plans. The job is pitched at an experienced Level II wanting more technical responsibility, or a Level III who likes to stay involved in daily inspection.
Methods: MT · Level: MT Level II or Level III (NAS 410) · Sector: Aerospace testing and inspection
What the job involves
- Perform wet continuous and residual magnetic particle inspections to customer specifications, internal procedures and approved techniques
- Set up and run MPI equipment such as magnetizing units, coils, prods and central conductors, and verify settings before and during tests
- Take parts through preparation, magnetization, particle application, inspection, demagnetization and cleaning, including complex shapes that need several field directions
- Evaluate and document relevant indications against the acceptance criteria, and keep inspection and processing records accurate
- Write and maintain MPI technique sheets for new and existing parts: magnetizing method, shot locations, current, field direction and coverage
- Review customer specifications, drawings and purchase orders to set inspection requirements, and revise or validate techniques as needed
What you need
- Current or recent MT Level II certification to NAS-410, or to an equivalent standard the customer approves
- Proven magnetic particle experience in aerospace, manufacturing or another high-specification setting
- Practice in both wet continuous and residual MPI
- Can read engineering drawings and specifications and can develop or modify technique plans
- Firm grasp of magnetization methods, field direction, demagnetization and the evaluation of indications
- Level III candidates: extensive technique development experience, the ability to review and approve techniques, and experience of audits, procedure writing, training and mentoring Level II staff
Pay and conditions
- Pay: USD 28-38 per hour, as published by Element Materials Technology.
- A hands-on post: most of the time is spent inspecting and developing techniques
How to apply
Apply directly with Element Materials Technology: the Apply for this job button opens this vacancy on the Element Materials Technology careers site. NDT Inspect found it on the employer’s careers page and checked that it was open on 21 November 2026. It is listed here until 21 February 2027.
















