Acceptance criteria of Visual inspection for steam boiler

  • Visual Inspection

    Acceptance criteria of Visual inspection for steam boiler

    Posted by leo on 27/11/2021 at 8:32 pm

    I can’t find acceptance criteria of visual inspection in ASME Sections : porosity, undercut, undersized weld,

    caleb-charles replied 2 years, 4 months ago 2 Members · 1 Reply
  • 1 Reply
  • Visual Inspection

    caleb-charles

    Member
    28/11/2021 at 5:07 pm

    You are speaking about “porosity, undercut, undersized weld”, so the acceptance criteria you need is about welds. Which section or part of the ASME are you speaking about?
    If you are speaking about ASME BPV code sect. VIII div. 1 the Subsection B part UW, paragraphs UW-33, UW-35, UW-36 can help you.
    If you are speaking about ASME BPV code sect. III div. 1 the Subsection NB Article NB-4000 paragraphs from NB-4400 can help you.
    If you are speaking about ASME BPV code sect. I the part PW paragraphs PW-33, PW-34, PW-35 and PW-36 can help you

Log in to reply.

Start of Discussion
0 of 0 replies June 2018
Now

Report

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .